60.J5016.CB1 OEM COMPATIBLE PROJECTION LAMP WITH HOUSING FOR DELL PROJECTORS

• 250W,2,000 Hrs2,000

Brand New OEM Lamp completed with Model and Housing, 30 Days Refund &120 Days Warranty! Model#: 60.J5016.CB1 Fits the Projectors for :BenQ PB7000 BenQ PB7100 BenQ PB7105 BenQ PB7110-PVIP BenQ PB7110-UHP BenQ PB7115 BenQ PB7200 BenQ PB7205 BenQ PB7210 BenQ PB7210-PVIP BenQ PB7210-UHP BenQ PB7220 BenQ PB7225 BenQ PB7230 BenQ PB7230-PVIP BenQ PB7230-UHP BenQ PE7100 BenQ PE8250 LG RD-JT50 LG RD-JT52 Toshiba TDP-D1 Toshiba TDP-D1-US Toshiba TDP-D2 Toshiba TDP-D2-US , , , $ 79.86, $ 79.86,

Price: $ 79.86

Question by K O: Mitsubishi WL-82913 botom projection TV problem.Hi Folks, I’m new and have a Mitsu WL-82913 that was handed d
The Lamp is not lighting, there is no indication of audio. The front panel LEDs, Lamp, Status and Pwr act as if the unit goes straight to power saver standby mode with the pwr LED blinking fast as soon as its plugged in. Pressing the power button does nothing, pressing the reset appears to run it through the same routine as plugging it in. At least it sounds that way.
I purchased a service manual and to trouble shoot I’ve done the following:
Verified the power supply that supplies the 370 Vdc to the lamp power board present at the correct point.
Exchanged the lamp with a supposed good one. When the lamp was removed I did get the correct “defective lamp” indication at the lamp LED.
The svc manl says that if the 370 Vdc is is present going into the ‘lamp-sub-board’ and the lamp does not light to replace the board. My questions:
Is the “lamp-sub-board” dumb board? Meaning just put power to the input terminals and it fires the lamp?

Best answer:

Answer by fecomosis
Send me the service manual.

fecomosis@yahoo.com

Add your own answer in the comments!

www.dealextreme.com